Top 9 Quartz Clock Movement Mechanism – Clocks

As an Amazon Associate I earn from qualifying purchases.

1. ULTNICE

#ad

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

#ad
ULTNICE #ad - Powered by 1 aa batterynot included, carbon batteries, You can use No. 5 aa batteries, alkaline batteries. Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2. 2 x 06inch. Cannot Use Rechargeable Batteries. The error is less than +-1.

5 seconds/day, and the power consumption is less than 200 microamps. Diameter : the minute shaft diameter is 3. 6-3. 7mm, and the Hour Shaft Diameter is 5. 5mm. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. Screw shaft Diameter 7. 6mm. For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. Please note: please measure the shaft of you clock mechanism you need before buying ! Thank you for your understanding!!! Important : this model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, the measured length may be slightly different from the actual one.

BrandULTNICE #ad
ManufacturerULTNICE #ad
Height0.63 Inches
Length2.2 Inches
Weight0.02 Pounds
Width2.2 Inches
Part Number21F2118PVNU
Model21F2118PVNU

2. Takane

#ad

Choose your size, Takane Complete Mini Quartz Clock Movement, Clock Repair Kit

#ad
Takane #ad - Shaft diameter: 5/16". Maximum minute hand length from hole to tip, 6 inches Order a high torque movement if you need longer then that. Overall shaft Length: 1". Hour & minute hand available UPON REQUEST ONLY. Includes all mounting hardware and metal wall hangar. Please see below for full product description including how to receive hands. Threaded shaft Length 11/16".
BrandTakane #ad
ManufacturerTakane #ad
Weight0.25 Pounds
Part Number1

3. Outus

#ad

DIY Large 3D Wall Clock Hands Quartz Clock Movement Mechanism with 2 Pairs Large Clock Needles Accessories for Kitchen Office and Home Art Decor

#ad
Outus #ad - Package contains: you will get 1 piece of large quartz clock movement unit, 2 sets of accessories and 2 different sets of hands including only 1 piece of minute hand and 1 piece of hour hand of each set; There are several styles to choose from, suitable for different styles of clock frames.

Sturdy to use: the clock hands are made of aluminum, not easy to break or rust, smooth to touch and reliable to use, which can serve you for a long time; Also please do not use too much pressure to avoid bending. Multiple occasions: these clock replacement accessories can be applied in office, classroom, living room, library and other occasions, restaurant, bedroom, also they are suitable for craft clocks, frameless wall clocks and quartz wall clock. Size specification: the hour hand is about 8.

0 inches in length, the minute hand is about 12 inches in length and the second cap measures about 03 inches, so you can apply the clock movement kit to DIY a mini wall clock of about 30 inches; Please check the size before purchasing. Nice performance: the large quartz clock movement mechanism is equipped with nice precision and torque, ensuring the accuracy and reliability of the DIY clock, and the step motion accompanied by ticking sounds are powered by AA batteries.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberTJRW-Outus-3492
Model01

4. YQSDG

#ad

YQSDG 55mm DIY Tide Quartz Controlled Repair Wall Clock Movement Motor Mechanism Replacement 115mm Hands Fitting Motor Watch

#ad
YQSDG #ad - Fit for tide quartz controlled wall clock replacement movement part. You can buy it from the local shop. Suitable for hand-made and repaired by yourself.

Energy efficient. Accurate time keeping. Quality tide quartz clock movement, long lifetime guaranteed. With roHS approved. Size : about 55 x 55 x 15 mm 2. 17 x 2. 17 x 059 inch. The shaft length is about 17mm067 inch. You can also replace the broken part of your old clock. Not a regular 12 hr clock mechanism. Powered by 1 no. 5 aa batterynot included. Easy to install and repair. The back hand length is about 115mm4. 53 inch. Diy clock replacement supply.
BrandYQSDG #ad
ManufacturerYQSDG #ad
Height2.17 Inches
Length0.59 Inches
Width0.01 Inches

5. Hicarer

#ad

Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories

#ad
Hicarer #ad - Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office.7 mm/ 03 inch´╝îplease check the size before purchase.

Center of hole hand size: the hour hand is approx. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1. 5 v aa battery not included. 70 cm/ 30 inch. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending.
BrandHicarer #ad
ManufacturerHicarer #ad
Height0.79 Inches
Length16.73 Inches
Weight0.3 Pounds
Width3.94 Inches
Part NumberHicarer-Clock Movement-01

6. Outus

#ad

4 Pieces Quartz Clock Movement Mechanism Non Ticking DIY Clock Mechanism with 6 Clock Hands Sets for Repair Parts Replacement 18 mm, Gold, Black

#ad
Outus #ad - Size: the total shaft length is approx. 11 mm/ 043 inch; the clock movement mechanism are suitable for 4 - 7 mm/ 016 - 028 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter; Please keep the hour hand and minute hand parallel when you install this clock movement kit.

18 mm/ 071 inch, and the thread length is approx. Clock design: the design of the clock hands are simple and fashionable which have a various styles, and the color is classic and does not fade; The long-axis clock mechanism provides accuracy and reliability, and and there is no ticking noise to interrupt your work or rest, providing you with a quiet environment. Quality material: the movement is made of abs material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect.

Package includes: you will get 4 pieces quartz clock movement mechanisms with 4 sets of accessories, and 6 sets of different pointer kits; There are various styles to choose, which is very suitable for different styles of clock frames. Widely applicable: these clock replacement parts can be applied in office, library and other occasions, classroom, restaurant, craft clocks, frameless wall clocks, bedroom, living room, and also suitable for cross-stitch, quartz wall clock to use.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-Clocks-T1155

7. Mudder

#ad

11/25 Inch Maximum Dial Thickness, Mudder Silence Quartz Clock Movement, 4/5 Inch Total Shaft Length Black

#ad
Mudder #ad - Diy quartz wall clock replacement movement parts; Note: black on the front and silver on the back. Suitable for repairing, replacing or making a clock. Applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, craft clock, etc. Total shaft length is 20 mm 4/ 5 inches, thread length 14 mm 3/ 5 inches. Mute scanning movement, suitable for 8 - 11 mm 3/ 10 - 11/ 25 inches thickness clock panel.
BrandMudder #ad
ManufacturerMudder #ad
Height0.63 Inches
Length2.17 Inches
Weight0.09 Pounds
Width2.17 Inches
Part NumberHK00E1554
Model8541847128

8. Mudder

#ad

Mudder 3D Clock Hands DIY Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories Black

#ad
Mudder #ad - 50 cm. Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office.

Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx. 7 mm 03 inch. Center of hole hand size: hour hand is approx. 170 mm 6. 7 inch; minute hand is 243 mm 9. 6 inch; Second cap: approx. Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minute testing the clock move or not.
BrandMudder #ad
ManufacturerMudder #ad
Height0.06 Inches
Length0.04 Inches
Weight0.22 Pounds
Width0 Inches
Part NumberMudder-Wall Clock-01
ModelTRTA11A

9. Dans Clock Shop

#ad

New Replacement 6168s Sangtai Non Ticking Quartz Clock Movement Mechanism Motor Medium, 10mm Gold Thread

#ad
Dans Clock Shop #ad - Complete with all fittings, fully tested with fitting instructions, ROHS approved. Non ticking - second hand sweeps rather than ticks for a quieter. Please note that movements are compatible with quartz press fit hands with a shaft size for the hour hand 5. 5mm and minute hand 3. 6mm. Movements suitable for hand sizes up to 130mm, high torque movements are needed for larger hands and are available from my shop. Movement dimensions - height 70mm 55mm with hanger removed - width 55mm - Depth 16mm.
BrandDans Clock Shop #ad
ManufacturerQuartz #ad
Height2.76 Inches
Length2.2 Inches
Width0.63 Inches
Part Number7426974064740