Top 7 PEX Pipe Hangers – Pipe Fittings

As an Amazon Associate I earn from qualifying purchases.

1. Watts

#ad

100-Pack, Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support

#adWatts #ad - 1/2-inch j-hook pipe hanger for PEX tubing. For supporting supply and return piping. Easy to use for contractors and homeowners. Comes with 100 J-hooks per bag. J-hook design makes supporting and removing pipe easy.

Brand	Watts #ad
Manufacturer	Watts #ad
Height	3 Inches
Length	8 Inches
Weight	0.31 Pounds
Width	6 Inches
Part Number	P-960
Model	P-960
Warranty	Watts Regulator Company (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge. The Warranty set forth herein is given expressly and is the only warranty given by the company with spect to the product. The company makes no other warranties, express or implied. The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty and the company shall not be responsible for any incidental, special, or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product. Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to determine your rights. So far as is consistent with applicable state law. Any implied warranties that may not be disclaimed, including the implied warranties of merchantibility and fitness for a particular purpose, are limited in duration to one year from the date of original shipment.

2. HIGHCRAFT

#ad

10 Pack, HIGHCRAFT ICF-DQ34-10 Bell Hanger Copper Coated Steel for 3/4'' Pipe 10PK

#adHIGHCRAFT #ad - Standoff from Surface. Super easy installation: with Split Ring Design and Included Mounting Screws. Dimensions: fits 3/4 in. Compliance: ul Listed and FM Approved. Versatile: primarily designed for suspending copper Piping Off Mounting Surface; But is Also Super Handy in Various DIY Projects; Repairs; and Industrial Décor. Copper piping; with 13/16 in. Includes 2 closure screws and 1 Mounting Screw No Additional Supplies Needed! .

Brand	HIGHCRAFT #ad
Manufacturer	Highcraft #ad
Height	0.5 Inches
Length	1.5 Inches
Width	0.75 Inches
Part Number	ICF-DQ34-10
Model	ICF-DQ34-10

3. SharkBite

#ad

SharkBite PEX Pipe Crimp Ring 1/2 Inch, 1/2-Inch, Plumbing Fittings, 23102CP100, 100 Count, Pack of 100

#adSharkBite #ad - Assurance: copper clamp rings and heavy duty PEX Crimping tool do not require calibration and allows each joint to be checked with a go/no-go gauge.

Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Use: use with sharkbite pex pipe tubing, PEX Crimp Tool and barb fittings. Residential and commercial: all sharkbite products meet the same standards for commercial and residential plumbing applications.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	0.5 Inches
Length	0.5 Inches
Weight	1.32 Pounds
Width	0.5 Inches
Part Number	23102CP100
Model	23102CP100
Warranty	Limited 2 Year

4. Sioux Chief

#ad

Sioux Chief 506-36CPK2 Pipe Hanger Hook 3/4 X 6" 5 Pack

#adSioux Chief #ad - This item is pipe hanger Hook 3/4 X 6in 5pk. The product is manufactured in United States. The product is manufactured in United States. This item is pipe hanger Hook 3/4 X 6in 5pk. Used for hardware, Fasteners & Hooks Accessories.

Brand	Sioux Chief #ad
Manufacturer	Jensen (Home Improvement) #ad
Height	1.5 Inches
Length	6.3 Inches
Weight	0.3 Pounds
Width	2 Inches
Part Number	506-36CPK2
Model	506-36CPK2

5. FULLBOW

#ad

DIY Target Kit for 1 Inch OD EMT Conduit, Pipe Target Holders Assembly Stands, Gong Target Hanging Kit, Fullbow Steel Target Hangers Hanging Hook Target Kit

#adFULLBOW #ad - Hang anything up that you want with this gong target hanging kit, this setup is very easy and portable, you may complete setup in not more than 1 minute probably. Emt conduit not included.

Warm reminder : 1 inch pipe diameter is 1. 32 inch, you'll need 1 inch electric metallic tube or 3/4 inch pipe, it can not fit our hooks! DO NOT BUY 1 INCH PIPE! Please buy 1 inch EMT conduit! Please search fullbow ar500 steel Target Hangers Hanging Hook Target Kit if you would like stronger one. Please make sure your pipe diameter less than 1. 2 inch. Please kindly note, powder coated flat black to protect against wear and rust, steady and sturdy, they are made of crs material 1020 steel, perfect for hanging all your targets. When you buy conduit, instead of 1 inch pipe. Included 2 leg brackets and 4 hooks and a zip-style fabric bag.

Brand	FULLBOW #ad
Manufacturer	HYH #ad
Part Number	HH001

6. Antrader

#ad

Antrader Wall Mount Ceiling Mount Shower Curtain Closet Rod Rail Pipe Support, Adjustable Stainless Steel Bracket Clamp for Dia 25mm 3/4 inch Pipe Tube, 2 Pack with Screw

#adAntrader #ad - It features wall mount or ceiling mount and made of Stainless Steel with Chrome Finish, durable and rust resistant. Best choice for pipe, tube or rod fixation used at home or in the store. Fit for dia 25mm-28mm 3/4-inch pipe. Base diameter : 60mm/ 2. 36-inch; mount Hole Quantity : 3. Package content: 2pcs x Pipe Supports, 6pcs x Mounting Screws and Anchors.

Brand	Antrader #ad
Manufacturer	Guangzhou Openfind Electronic Commerce CO., LTD #ad
Part Number	BZ112778
Model	θ25

7. SharkBite

#ad

Copper, 1/2-Inch x 1/2-Inch, SharkBite UC334LFA PEX Brass Drop Ear Elbow

#adSharkBite #ad - Versatile: sharkbite plumbing fittings fit copper, CPVC, CTS, and PEX pipe and connect all 4 types in any combination. Installs in seconds: No soldering or glue; Just crimp to create a watertight seal. Certified: sharkbite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times. High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections. Lead-free: made of high-quality forged DZR brass that is lead-free.

Brand	SharkBite #ad
Manufacturer	Cash Acme #ad
Height	2 Inches
Length	5 Inches
Weight	0.18 Pounds
Width	3 Inches
Part Number	UC334LFA
Model	UC334LFA
Warranty	Limited 5 Year